INPUT-SECTION- 6 mono input channels can be supplied as MIC
over XLR sockets or as LINE over 6.3 mm jack sockets. CH 7/8 & 9/10
can be operated mono (L) and stereo (L/R). CH 11/12 & CH 13/14 used
as stereo AUX returns or as LINE level CH. - CH 1-6 have pre-amplifying
controls for MIC “Gain“ and for LINE “Trim“. CH 7/8 & 9/10 have
input level switches. CH 1-3 are equipped with low-cut switches and a
3-band channel-EQ with semi-parametric mids. CH 4-10 feature a 3-band
CH-EQ. There are panorama controls for mono and balance controls for
stereo CH (except for CH 11-14).- Pre-listening to all CH and monitor
sum, main L/R, mono out and AFL/PFL is possible with an adjustable
headphone output. 2 pre-fader and one post-fader AUX ways per CH as
well as CH-insert for CH 4-6 PRE-Fader/PRE-EQ.- Phantom power is
centrally switchable for all MIC inputs.
AMP.-/ MASTER-SECTION-
The main amplifier output (L/R, each 300 W @ 4 Ohms) has 2 speak-on
output sockets or 2 jack sockets, connected in parallel, which can be
adjusted by a stereo master fader (L+R) over a LED meter display and a
graphic-EQ L/R. Amp-mode, either L+R monitor or L/R stereo, selectable.
- 2 RCA in-/output sockets with level control and solo switch serve for
2-track IN/OUT (L/R). A mono-fader with switchable LPF serves for
subwoofer-out, main L/R and monitor pre-amp out for external power
amplifiers.
EFFECT-SECTION- A switchable 24-bit digital effects
board enables to add 99 high-grade effects with a DSP master fader to
the sum and with another control also to the monitor way. Easy to
handle over digital display with up/down push-button.
HIGH-LIGHTS-
Use of the internal power amplifier and the master EQ automatic
switch-off of the mixer section over amp-input.- The mixer PMX-614 is
designed to be tabletop unit or for integration into 19“ racks. The 19“
mounting angles “RMK-14 P“ (9 RU) are optionally available.
Clientii Five's Shop nu au adaugat inca opinii pentru acest produs. Fii primul care adauga o parere, folosind formularul de mai jos.