Crossover 3-way (Stereo) or 4-5-way (Mono)
Features
- INPUT-SECTION
The crossover SEC-304, with its 24 dB/oct. active crossover filters,
assigns most precisely the selected frequency band to each loudspeaker.
Input level controls with peak display LED for stereo (2x) and mono
(1x) operation can be supplied and adjusted over rear-side XLR sockets
(balanced). By a selector switch, the desired mode (stereo or mono
operation) can be selected.
- STEREO-SECTION At stereo operation,
a high-level control without frequency control as well as a mid- and a
low-level control with frequency control from 60 Hz to 1.3 kHz or from
600 Hz to 13 kHz (switchable) as well as a mute switch are available
for CH A and B respectively. The adjusted signal can be put out over
XLR sockets (balanced) on the rear for high, mid and low respectively.
- MONO-SECTION
At mono operation, a high-level control without frequency control, a
high-mid, a low-mid and a low level control with frequency control from
60 Hz to 1.3 kHz or from 600 Hz to 13 kHz (switchable) as well as a
mute switch are available. The adjusted signal can be put out over XLR
sockets (balanced) on the rear for high, high-mid, low-mid and low
respectively.
- SUBWOOFER-SECTION Independently from the
operation mode (mono / stereo), a mono subwoofer section with frequency
control, level control, low-cut filter (switchable 15 Hz 18 dB/oct.)
and mute switch is additionally available. The adjusted signal here
also can be put out over a XLR socket on the rear side.
- SPECIALS
- The crossover SEC-304, made in 19˝ design with 1 RU, further features
a ground/lift switch on the rear in order to avoid possibly occurring
hum loops.- The power supply takes place over an IEC power socket on
the rear side of the device. The power ON/OFF switch is on the front
side.
Clientii Five's Shop nu au adaugat inca opinii pentru acest produs. Fii primul care adauga o parere, folosind formularul de mai jos.