The
crossover SEC-203/SEC-304, with its 24 dB/oct. active crossover
filters, assigns most precisely the selected frequency band to each
loudspeaker. Input level controls with peak display LED for stereo (2x)
and mono (1x) operation can be supplied and adjusted over rear-side XLR
sockets (balanced). By a selector switch, the desired mode (stereo or
mono operation) can be selected. At stereo operation, a high-level
control without frequency control as well as a mid-control (only
SEC-304) and a low-level control with frequency control from 60 Hz to
1.3 kHz or from 600 Hz to 13 kHz (switchable) as well as a mute switch
are available for CH A and B respectively. The adjusted signal can be
put out over XLR sockets (balanced) on the rear for high, mid and low
respectively. At mono operation, a high-level control without frequency
control, a mid (only SEC-203), a high-mid/low-mid (only SEC-304) and a
low level control with frequency control from 60 Hz to 1.3 kHz or from
600 Hz to 13 kHz (switchable) as well as a mute switch are available.
The adjusted signal can be put out over XLR sockets (balanced) on the
rear for high, high-mid, low-mid and low respectively. Independently
from the operation mode (mono / stereo), a mono subwoofer section with
frequency control, level control, low-cut filter (switchable 15 Hz 18
dB/oct.) and mute switch is additionally available. The adjusted signal
here also can be put out over a XLR socket on the rear side.
Features
- The
crossover SEC-304, made in 19 ˝ design with 1 RU, further features a
ground/lift switch on the rear in order to avoid possibly occurring hum
loops.
- The power supply takes place over an IEC power socket on
the rear side of the device. The power ON/OFF switch is on the front
side.
Clientii Five's Shop nu au adaugat inca opinii pentru acest produs. Fii primul care adauga o parere, folosind formularul de mai jos.